The LCT 1040 Tube/FET condenser microphone system from Lewitt Audio Microphones offers four all-analog tube characteristics and a crystal-clear FET circuit to create the ideal sound. You can dial in the FET circuit via the Circuit control whenever you're looking for that extra punch or precision for your voice or instrument.
Set the directivity with the seamless polar pattern control of the LCT 1040, giving you exactly what you were looking for. Additionally, you can also freely define the front of the mic depending on your recording scenario using the Default/Reverse flip switch. To prepare you for all possible scenarios, the LCT 1040 features two XLR outputs with Neutrik connectors.Premium tube and FET microphone in one Gold-sputtered 1" true condenser capsule Four all-analog tube characteristics: Clear, Warm, Dark and Saturated Blend tube and FET circuit at any ratio Remote control to adjust all settings from your sweet spot Seamless polar pattern control, low-cut filter, pre-attenuation E88CC/6DJ8 tube from JJ Electronics Box contents
Set the directivity with the seamless polar pattern control of the LCT 1040, giving you exactly what you were looking for. Additionally, you can also freely define the front of the mic depending on your recording scenario using the Default/Reverse flip switch. To prepare you for all possible scenarios, the LCT 1040 features two XLR outputs with Neutrik connectors.
Tweak All Settings From Your Sweet Spot via the Remote Control
Set up the LCT 1040 in the recording room where the artist performs. Detach the remote control from the PSU and connect them via your standard 3-pin XLR cable. Now you can fine-tune your sound from your sweet spot via the remote control, ensuring a smooth-running session.
Dual-layer Magnetic Pop Filter
The high-performance magnetic pop filter of the LCT 1040 protects your capsule from unwanted plosives and moisture. Its double-layer design perfectly integrates with the shockmount and ensures clean recordings with any vocalist or genre.
Features
- Tube microphone
- Power supply
- Remote control
- Dual-layer magnetic pop screen
- Shockmount
- Microphone mount
- 11-pin cable
- Mil-spec transport case
- Type: Condenser, externally polarized
- Acoustical operating principle: Pressure-gradient transducer
- Transducer Ø: 1"
- Polar patterns: Seamless blend, Omni, wide cardioid, cardioid, supercardioid, figure-8
- Frequency range: 20–20,000Hz
- Sensitivity: 17.2mV/Pa, –35.3dBV/Pa (cardioid)
- Self-noise: 10dB (A) FET, 13dB(A) tube (cardioid)
- Max SPL at 0.5% THD: 137dBSPL (FET), 0dB attenuation
- Signal/noise ratio: 84dB(A) FET, 81dB(A) tube
- Dynamic range: 127dB(A) FET
- Low-cut filter: lin 40Hz (12dB/oct), 80Hz (12dB/oct), 120Hz (6dB/oct)
- Pre-attenuation: 0dB, –6dB, –12dB, –24dB
- Internal impedance: 83.8 ohms
- PSU supply voltage: 230V, 50Hz; 110V, 60Hz
- Current consumption: 230V, 170mA, 110V–240mA
- Connector PSU and remote: Gold-plated 3-pin XLR by Neutrik
- Connector: 10-pin audio cable by Hirose Electric
- Microphone enclosure: Zinc die-cast
- Microphone dimensions: 7.7" x 2.6" x 1.8"
- Microphone net weight: 23 oz.
- PSU dimensions: 9.4" x 6.7" x 1.9"
- PSU weight: 68 oz.
- Remote dimensions: 9.4" x 6.4" x 2"
- Remote weight: 69 oz.
Specs
LEWITT LCT 1040 Tube FET Condenser Microphone System
- Product Code: 1500000369066
The LCT 1040 Tube/FET condenser microphone system from Lewitt Audio Microphones offers four all-analog tube characteristics and a crystal-clear FET circuit to create the ideal sound. You can dial in the FET circuit via the Circuit control whenever you're looking for that extra punch or precision for your voice or instrument.
Set the directivity with the seamless polar pattern control of the LCT 1040, giving you exactly what you were looking for. Additionally, you can also freely define the front of the mic depending on your recording scenario using the Default/Reverse flip switch. To prepare you for all possible scenarios, the LCT 1040 features two XLR outputs with Neutrik connectors.Premium tube and FET microphone in one Gold-sputtered 1" true condenser capsule Four all-analog tube characteristics: Clear, Warm, Dark and Saturated Blend tube and FET circuit at any ratio Remote control to adjust all settings from your sweet spot Seamless polar pattern control, low-cut filter, pre-attenuation E88CC/6DJ8 tube from JJ Electronics Box contents
Set the directivity with the seamless polar pattern control of the LCT 1040, giving you exactly what you were looking for. Additionally, you can also freely define the front of the mic depending on your recording scenario using the Default/Reverse flip switch. To prepare you for all possible scenarios, the LCT 1040 features two XLR outputs with Neutrik connectors.
Tweak All Settings From Your Sweet Spot via the Remote Control
Set up the LCT 1040 in the recording room where the artist performs. Detach the remote control from the PSU and connect them via your standard 3-pin XLR cable. Now you can fine-tune your sound from your sweet spot via the remote control, ensuring a smooth-running session.
Dual-layer Magnetic Pop Filter
The high-performance magnetic pop filter of the LCT 1040 protects your capsule from unwanted plosives and moisture. Its double-layer design perfectly integrates with the shockmount and ensures clean recordings with any vocalist or genre.
Features
- Tube microphone
- Power supply
- Remote control
- Dual-layer magnetic pop screen
- Shockmount
- Microphone mount
- 11-pin cable
- Mil-spec transport case
- Type: Condenser, externally polarized
- Acoustical operating principle: Pressure-gradient transducer
- Transducer Ø: 1"
- Polar patterns: Seamless blend, Omni, wide cardioid, cardioid, supercardioid, figure-8
- Frequency range: 20–20,000Hz
- Sensitivity: 17.2mV/Pa, –35.3dBV/Pa (cardioid)
- Self-noise: 10dB (A) FET, 13dB(A) tube (cardioid)
- Max SPL at 0.5% THD: 137dBSPL (FET), 0dB attenuation
- Signal/noise ratio: 84dB(A) FET, 81dB(A) tube
- Dynamic range: 127dB(A) FET
- Low-cut filter: lin 40Hz (12dB/oct), 80Hz (12dB/oct), 120Hz (6dB/oct)
- Pre-attenuation: 0dB, –6dB, –12dB, –24dB
- Internal impedance: 83.8 ohms
- PSU supply voltage: 230V, 50Hz; 110V, 60Hz
- Current consumption: 230V, 170mA, 110V–240mA
- Connector PSU and remote: Gold-plated 3-pin XLR by Neutrik
- Connector: 10-pin audio cable by Hirose Electric
- Microphone enclosure: Zinc die-cast
- Microphone dimensions: 7.7" x 2.6" x 1.8"
- Microphone net weight: 23 oz.
- PSU dimensions: 9.4" x 6.7" x 1.9"
- PSU weight: 68 oz.
- Remote dimensions: 9.4" x 6.4" x 2"
- Remote weight: 69 oz.
Specs
- Brand: LEWITT
- Viewed: 25
- Availability: In Stock
