Classic sound meets modern craftsmanship with sE Electronics' SE4400 Large Diaphragm Condenser Microphone. With an improved design, this multi-pattern large-diaphragm true-condenser microphone is handcrafted with the highest attention to detail. Featuring a roadworthy die-cast all-metal housing, metal switches and a rugged spring steel wire mesh grille that can take a beating during day-to-day tour life. The sE4400 appeals all with its down-to-earth elegance, offering discrete electronics prioritizing the features you really need. The sE4400 brings sought-after classic sound back to mic lockers worldwide.
Free of thrills, No LEDs. No plastic switches.
Select between four polar patterns with metal switches, from cardioid to omnidirectional or figure-eight to hypercardioid, with a gold-sputtered, dual-diaphragm capsule for precision-based miking techniques to minimize signal bleed from unwanted sources in demanding studio or fast-paced live environments.
Handcrafted 1" true condenser capsule
Individually tuned and cared for by sE’s skilled technicians, each sE4400’s handcrafted, gold-sputtered, dual-diaphragm capsule captures sound sources of all kinds with breathtaking clarity and precision, be it in demanding studio or fast-paced live environments.
Switchable pre-attenuation pad
Select between two pre-attenuation pads for an extended dynamic range and compensate for loud vocals, guitars, drums and brass instruments.
Switchable low-cut filter
Easily tame excessive low-frequency rumble and proximity effect with two low-cut filters and efficiently adjust for close-miking techniques.
Dent-proof metal housing with premium finish
Hand-crafted with the highest attention to detail, built with a roadworthy die-cast all-metal housing, metal switches, and rugged spring steel wire mesh grille, the sE4400 is built to last for years of demanding studio use and the day-to-day life of a touring artist.
Available in Matched Pair Configurations
Each sE4400 Matched Pair is rigorously tested, tuned in-house and sonically matched to ensure a virtually identical frequency response for balanced, consistent sound. Complete with a metal mic case, stereo bar, two shockmounts and two sE4400 microphones.
Free of thrills, No LEDs. No plastic switches.
Select between four polar patterns with metal switches, from cardioid to omnidirectional or figure-eight to hypercardioid, with a gold-sputtered, dual-diaphragm capsule for precision-based miking techniques to minimize signal bleed from unwanted sources in demanding studio or fast-paced live environments.
Handcrafted 1" true condenser capsule
Individually tuned and cared for by sE’s skilled technicians, each sE4400’s handcrafted, gold-sputtered, dual-diaphragm capsule captures sound sources of all kinds with breathtaking clarity and precision, be it in demanding studio or fast-paced live environments.
Switchable pre-attenuation pad
Select between two pre-attenuation pads for an extended dynamic range and compensate for loud vocals, guitars, drums and brass instruments.
Switchable low-cut filter
Easily tame excessive low-frequency rumble and proximity effect with two low-cut filters and efficiently adjust for close-miking techniques.
Dent-proof metal housing with premium finish
Hand-crafted with the highest attention to detail, built with a roadworthy die-cast all-metal housing, metal switches, and rugged spring steel wire mesh grille, the sE4400 is built to last for years of demanding studio use and the day-to-day life of a touring artist.
Available in Matched Pair Configurations
Each sE4400 Matched Pair is rigorously tested, tuned in-house and sonically matched to ensure a virtually identical frequency response for balanced, consistent sound. Complete with a metal mic case, stereo bar, two shockmounts and two sE4400 microphones.
Features
- Four selectable polar patterns
- Hand-crafted 1" true condenser capsule
- Switchable pre-attenuation pad
- Switchable low-cut filter
- Handcrafted metal housing with premium finish
- Frequency response: 40Hz - 80 Hz
- Polar pattern: Cardioid, Omnidirectional, Figure-eight or Hypercardioid
- Applications: Stereo
- Diaphragm size: Large
- Case: Yes
- Clip: No
- Shockmount: Yes
- Power supply: No
- Cable: Yes
- Stand: No
Specs
Audio
sE Electronics SE4400 Pair Condenser Microphones
- Product Code: 1500000405653
Classic sound meets modern craftsmanship with sE Electronics' SE4400 Large Diaphragm Condenser Microphone. With an improved design, this multi-pattern large-diaphragm true-condenser microphone is handcrafted with the highest attention to detail. Featuring a roadworthy die-cast all-metal housing, metal switches and a rugged spring steel wire mesh grille that can take a beating during day-to-day tour life. The sE4400 appeals all with its down-to-earth elegance, offering discrete electronics prioritizing the features you really need. The sE4400 brings sought-after classic sound back to mic lockers worldwide.
Free of thrills, No LEDs. No plastic switches.
Select between four polar patterns with metal switches, from cardioid to omnidirectional or figure-eight to hypercardioid, with a gold-sputtered, dual-diaphragm capsule for precision-based miking techniques to minimize signal bleed from unwanted sources in demanding studio or fast-paced live environments.
Handcrafted 1" true condenser capsule
Individually tuned and cared for by sE’s skilled technicians, each sE4400’s handcrafted, gold-sputtered, dual-diaphragm capsule captures sound sources of all kinds with breathtaking clarity and precision, be it in demanding studio or fast-paced live environments.
Switchable pre-attenuation pad
Select between two pre-attenuation pads for an extended dynamic range and compensate for loud vocals, guitars, drums and brass instruments.
Switchable low-cut filter
Easily tame excessive low-frequency rumble and proximity effect with two low-cut filters and efficiently adjust for close-miking techniques.
Dent-proof metal housing with premium finish
Hand-crafted with the highest attention to detail, built with a roadworthy die-cast all-metal housing, metal switches, and rugged spring steel wire mesh grille, the sE4400 is built to last for years of demanding studio use and the day-to-day life of a touring artist.
Available in Matched Pair Configurations
Each sE4400 Matched Pair is rigorously tested, tuned in-house and sonically matched to ensure a virtually identical frequency response for balanced, consistent sound. Complete with a metal mic case, stereo bar, two shockmounts and two sE4400 microphones.
Free of thrills, No LEDs. No plastic switches.
Select between four polar patterns with metal switches, from cardioid to omnidirectional or figure-eight to hypercardioid, with a gold-sputtered, dual-diaphragm capsule for precision-based miking techniques to minimize signal bleed from unwanted sources in demanding studio or fast-paced live environments.
Handcrafted 1" true condenser capsule
Individually tuned and cared for by sE’s skilled technicians, each sE4400’s handcrafted, gold-sputtered, dual-diaphragm capsule captures sound sources of all kinds with breathtaking clarity and precision, be it in demanding studio or fast-paced live environments.
Switchable pre-attenuation pad
Select between two pre-attenuation pads for an extended dynamic range and compensate for loud vocals, guitars, drums and brass instruments.
Switchable low-cut filter
Easily tame excessive low-frequency rumble and proximity effect with two low-cut filters and efficiently adjust for close-miking techniques.
Dent-proof metal housing with premium finish
Hand-crafted with the highest attention to detail, built with a roadworthy die-cast all-metal housing, metal switches, and rugged spring steel wire mesh grille, the sE4400 is built to last for years of demanding studio use and the day-to-day life of a touring artist.
Available in Matched Pair Configurations
Each sE4400 Matched Pair is rigorously tested, tuned in-house and sonically matched to ensure a virtually identical frequency response for balanced, consistent sound. Complete with a metal mic case, stereo bar, two shockmounts and two sE4400 microphones.
Features
- Four selectable polar patterns
- Hand-crafted 1" true condenser capsule
- Switchable pre-attenuation pad
- Switchable low-cut filter
- Handcrafted metal housing with premium finish
- Frequency response: 40Hz - 80 Hz
- Polar pattern: Cardioid, Omnidirectional, Figure-eight or Hypercardioid
- Applications: Stereo
- Diaphragm size: Large
- Case: Yes
- Clip: No
- Shockmount: Yes
- Power supply: No
- Cable: Yes
- Stand: No
Specs
Audio
- Brand: sE Electronics
- Viewed: 7
- Availability: In Stock
