The Peluso CEMC-6 is a solid-state small diaphragm condenser microphone capsule and amplifier set. The CEMC-6 ships with a cardioid pattern capsule with a 20 millimeter gold-sputtered diaphragm. Additional capsules are available in omni-directional, cardioid, and hyper-cardioid patterns. The CEMC-6 has very low self-noise. A high SPL allows it to handle very loud sources without distortion. A flat frequency response across its entire range provides a natural sound very true to your source. It achieves a balanced output with a generously sized transformer, eliminating interference and distortion.
The CEMC-6 features a -10 dB and -20 dB pad switch and a two-position high pass filter with 75hz and 150hz settings. This versatile microphone is used in the studio on everything from vocals and acoustic instruments to drum overheads. For the remote recordist this is a great mic for orchestras, live audience tapers and location sound. You'll always get great results from the CEMC-6, one of the most versatile and best sounding small diaphragm microphones on the market.
This kit features a pair of acoustically matched CEMC-6 microphones. Peluso individually tests and graphs the frequency response for every microphone. Stereo matched pairs are hand selected to have identical frequency responses across the audible spectrum (±1dB).
Additional capsules with omni-directional, cardioid, wide cardioid, and hyper-cardioid patterns available.
The CEMC-6 features a -10 dB and -20 dB pad switch and a two-position high pass filter with 75hz and 150hz settings. This versatile microphone is used in the studio on everything from vocals and acoustic instruments to drum overheads. For the remote recordist this is a great mic for orchestras, live audience tapers and location sound. You'll always get great results from the CEMC-6, one of the most versatile and best sounding small diaphragm microphones on the market.
This kit features a pair of acoustically matched CEMC-6 microphones. Peluso individually tests and graphs the frequency response for every microphone. Stereo matched pairs are hand selected to have identical frequency responses across the audible spectrum (±1dB).
Additional capsules with omni-directional, cardioid, wide cardioid, and hyper-cardioid patterns available.
Features
Microphone kit includes
- Two Acoustically Matched CEMC-6 Microphones with Cardioid Capsules
- Two Shock Mounts
- Two Hard Mounts
- Two Wind Screens
- Flight Case.
- Condenser Pressure Gradient w/ 20mm capsule
- 19Hz/25Khz
- Cardioid w/ removable capsule
- 10 mv/pa
- 200 ohms
- 156 dB w/ 20dB pad switch engaged
- 14 dB(A)
- Phantom - 48v ± 4v
- < 3.0 MA
- 22mm x 164mm
- 134 g
Specs
Type
Peluso CEMC6 SK Stereo Microphone Kit Nickel
- Product Code: 1500000348695
The Peluso CEMC-6 is a solid-state small diaphragm condenser microphone capsule and amplifier set. The CEMC-6 ships with a cardioid pattern capsule with a 20 millimeter gold-sputtered diaphragm. Additional capsules are available in omni-directional, cardioid, and hyper-cardioid patterns. The CEMC-6 has very low self-noise. A high SPL allows it to handle very loud sources without distortion. A flat frequency response across its entire range provides a natural sound very true to your source. It achieves a balanced output with a generously sized transformer, eliminating interference and distortion.
The CEMC-6 features a -10 dB and -20 dB pad switch and a two-position high pass filter with 75hz and 150hz settings. This versatile microphone is used in the studio on everything from vocals and acoustic instruments to drum overheads. For the remote recordist this is a great mic for orchestras, live audience tapers and location sound. You'll always get great results from the CEMC-6, one of the most versatile and best sounding small diaphragm microphones on the market.
This kit features a pair of acoustically matched CEMC-6 microphones. Peluso individually tests and graphs the frequency response for every microphone. Stereo matched pairs are hand selected to have identical frequency responses across the audible spectrum (±1dB).
Additional capsules with omni-directional, cardioid, wide cardioid, and hyper-cardioid patterns available.
The CEMC-6 features a -10 dB and -20 dB pad switch and a two-position high pass filter with 75hz and 150hz settings. This versatile microphone is used in the studio on everything from vocals and acoustic instruments to drum overheads. For the remote recordist this is a great mic for orchestras, live audience tapers and location sound. You'll always get great results from the CEMC-6, one of the most versatile and best sounding small diaphragm microphones on the market.
This kit features a pair of acoustically matched CEMC-6 microphones. Peluso individually tests and graphs the frequency response for every microphone. Stereo matched pairs are hand selected to have identical frequency responses across the audible spectrum (±1dB).
Additional capsules with omni-directional, cardioid, wide cardioid, and hyper-cardioid patterns available.
Features
Microphone kit includes
- Two Acoustically Matched CEMC-6 Microphones with Cardioid Capsules
- Two Shock Mounts
- Two Hard Mounts
- Two Wind Screens
- Flight Case.
- Condenser Pressure Gradient w/ 20mm capsule
- 19Hz/25Khz
- Cardioid w/ removable capsule
- 10 mv/pa
- 200 ohms
- 156 dB w/ 20dB pad switch engaged
- 14 dB(A)
- Phantom - 48v ± 4v
- < 3.0 MA
- 22mm x 164mm
- 134 g
Specs
Type
- Brand: Peluso Microphone Lab
- Viewed: 20
- Availability: In Stock
