Wish List 0
Big sale Everyday

Peluso R 14 Passive Ribbon Microphone Kit Nickel

$359.00

Peluso R 14 Passive Ribbon Microphone Kit for Studio Use

When designing the R 14, TR 14, and SR 14 microphones Peluso wanted to create a classic vintage-style ribbon microphone in the vein of the early RCA microphones. They used classic long ribbon geometry. Thin corrugated aluminum ribbon is tensioned between two rare earth neodymium magnets. As the ribbon moves with the ambient acoustic air pressure variation a current is induced in the ribbon itself. This current is the microphone's output signal. The ribbon is placed just forward of the magnet center. This provides a very slight low-end roll-off on the backside of the microphone, which can be very useful if proximity effect needs to be countered. The R 14 delivers clean, balanced output through the use of a custom output transformer. The R 14's sound is rich, warm, and silky smooth with generous low end. It is un-hyped, natural, and takes EQ very nicely. The R 14 ribbon microphone is the perfect complement to the condensers in your microphone collection.

Features

Microphone kit includes
    • R 14
      microphone in a wood box
    • Shock Mount.

      Specs

      Operating Principle
      • Electrodynamic Pressure Gradient
      Magnets
      • Rare Earth Neodymium
      Frequency Range
      • 30Hz/16KHz
      Polar Pattern
      • Figure 8 (Bi-Directional)
      Sensitivity
      • > -52 dBV re: 1v/pa
      Impedance
      • 200 ohms SPL: 149 dB
      Equivalent Noise
      • 0 dB(A)
      Power Requirements
      • None required or recommended
      Size
      • 36mm x 176 mm
      Weight
      • 496g

    Write a review

    Note: HTML is not translated!
        Bad           Good