This Audix MB5050 MicroBoom Carbon Fiber Boom System consists of a 50" (1270 mm) carbon fiber rod comes with an Audix MB1250 mini cardioid condenser microphone. Lightweight and able to attach to any microphone stand, the Audix MicroBoom MB5050 is a problem solver for many hard-to-reach miking applications, including choirs, plays and orchestras. Amplifying large areas without feedback is a classic sound reinforcement challenge, one made simple with the MB5050 system.
Audix employs high-quality shielded cable internally to ensure the cleanest audio signal path between the microphone and the bottom of the boom. The boom terminates in a mini-XLR male connector.
The MicroBoom MB5050 stand adapter is designed for total control over angle, rotation and position of the carbon fiber rod. A metal thumbscrew locks the rod firmly in place. The final angle and position of the microphone is controlled by the flexible metal gooseneck just below the microphone. The Audix MicroBoom MB5050 provides an ultraclean, professional and elegant appearance on stage along with exceptional performance and portability.Lighweight, rigid Portable, easy to position Clean, elegant appearance Exceptional sound quality Choice of capsules No external power needed Attaches to any mic stand Can be used horizontally or vertically 25" shielded mic cable with Mini-XLR female XLR male connectors Mic stand adapter with thumbscrew and wing nut adjustments MB1250 Mini Cardioid
Audix employs high-quality shielded cable internally to ensure the cleanest audio signal path between the microphone and the bottom of the boom. The boom terminates in a mini-XLR male connector.
The MicroBoom MB5050 stand adapter is designed for total control over angle, rotation and position of the carbon fiber rod. A metal thumbscrew locks the rod firmly in place. The final angle and position of the microphone is controlled by the flexible metal gooseneck just below the microphone. The Audix MicroBoom MB5050 provides an ultraclean, professional and elegant appearance on stage along with exceptional performance and portability.
Features
- Type: Condenser
- Polar Pattern: Cardioid/Hypercardioid (MB5050-HC)
- Frequency Response: 50Hz–19kHz
- Impedance: 150 ohms
- Sensitivity: 10 mv/Pa @ 1k
- Material Rod: Carbon Fiber
- Gooseneck: Steel
- Connectors: Brass
- Length of MB50: 50"/1,270 mm
- Diameter: .20"/7.4 mm Connectors
- Bottom: Mini-XLR male
- Top: Mini-XLR female
- Weight: 2.5 oz/78 g (without mic or clip)
- Finish: Non-reflective black
Specs
Audix MB5050 MicroBoom 50 Inch Carbon Fiber Boom Mic
- Product Code: 1273887989181
This Audix MB5050 MicroBoom Carbon Fiber Boom System consists of a 50" (1270 mm) carbon fiber rod comes with an Audix MB1250 mini cardioid condenser microphone. Lightweight and able to attach to any microphone stand, the Audix MicroBoom MB5050 is a problem solver for many hard-to-reach miking applications, including choirs, plays and orchestras. Amplifying large areas without feedback is a classic sound reinforcement challenge, one made simple with the MB5050 system.
Audix employs high-quality shielded cable internally to ensure the cleanest audio signal path between the microphone and the bottom of the boom. The boom terminates in a mini-XLR male connector.
The MicroBoom MB5050 stand adapter is designed for total control over angle, rotation and position of the carbon fiber rod. A metal thumbscrew locks the rod firmly in place. The final angle and position of the microphone is controlled by the flexible metal gooseneck just below the microphone. The Audix MicroBoom MB5050 provides an ultraclean, professional and elegant appearance on stage along with exceptional performance and portability.Lighweight, rigid Portable, easy to position Clean, elegant appearance Exceptional sound quality Choice of capsules No external power needed Attaches to any mic stand Can be used horizontally or vertically 25" shielded mic cable with Mini-XLR female XLR male connectors Mic stand adapter with thumbscrew and wing nut adjustments MB1250 Mini Cardioid
Audix employs high-quality shielded cable internally to ensure the cleanest audio signal path between the microphone and the bottom of the boom. The boom terminates in a mini-XLR male connector.
The MicroBoom MB5050 stand adapter is designed for total control over angle, rotation and position of the carbon fiber rod. A metal thumbscrew locks the rod firmly in place. The final angle and position of the microphone is controlled by the flexible metal gooseneck just below the microphone. The Audix MicroBoom MB5050 provides an ultraclean, professional and elegant appearance on stage along with exceptional performance and portability.
Features
- Type: Condenser
- Polar Pattern: Cardioid/Hypercardioid (MB5050-HC)
- Frequency Response: 50Hz–19kHz
- Impedance: 150 ohms
- Sensitivity: 10 mv/Pa @ 1k
- Material Rod: Carbon Fiber
- Gooseneck: Steel
- Connectors: Brass
- Length of MB50: 50"/1,270 mm
- Diameter: .20"/7.4 mm Connectors
- Bottom: Mini-XLR male
- Top: Mini-XLR female
- Weight: 2.5 oz/78 g (without mic or clip)
- Finish: Non-reflective black
Specs
- Brand: Audix
- Viewed: 14
- Availability: In Stock
