RedNet X2P is a compact 2x2 Dante audio interface with two microphone preamps, a stereo headphone amplifier and stereo line out to connect your studio monitors. With the device’s Dante inputs, you’ll deliver uncompressed, low-latency digital audio to your DAW—simply use a Power over Ethernet switch or PoE injector to do so.
The monitoring display allows unlimited insight and control of the mic preamps, headphone level and line out. A local input mixer allows "more me" monitoring control, while a control lockout ensures settings remain unchanged.
The two digitally-controlled mic preamps provide clean gain and each have individual phantom power, phase reverse, high-pass filter and Air controls. RedNet X2P provides high-performance audio conversion with over 118dB dynamic range. These converters have been expertly selected and calibrated to provide the best balance of sound quality, dynamic range and conversion latency.
Now comes with Brainworx bx_console Focusrite plug-in
This awesome plug-in recreates the analog signal paths of Focusrite’s revered ISA 110 and ISA 130 modules, which were a part of the Focusrite Studio Console. Designed and coded by the DSP geniuses at acclaimed software house Brainworx, the bx_console Focusrite VST/AU/AAX plug-in for Mac and PC faithfully captures the sound, feel and styling of the original iconic hardware.
If you purchased any Red, RedNet or ISA solution from January 2020 on, you will have the plug-in available in your Focusrite account as long as you’ve registered your product.Two of Focusrite's preamps provide ultra-clean gain, stereo linking, individual phantom power, a high-pass filter, phase reverse and Air mode High-quality conversion, with over 118dB dynamic range Power over Ethernet allows a single cable to deliver audio, control and power to RedNet X2P. Local input mix allows ‘more-me’ style monitoring for easy foldback control Mic stand mount keeps the unit out of the way and within reach Focusrite offers a 3-year manufacturer's warranty What's in the box
The monitoring display allows unlimited insight and control of the mic preamps, headphone level and line out. A local input mixer allows "more me" monitoring control, while a control lockout ensures settings remain unchanged.
The two digitally-controlled mic preamps provide clean gain and each have individual phantom power, phase reverse, high-pass filter and Air controls. RedNet X2P provides high-performance audio conversion with over 118dB dynamic range. These converters have been expertly selected and calibrated to provide the best balance of sound quality, dynamic range and conversion latency.
Now comes with Brainworx bx_console Focusrite plug-in
This awesome plug-in recreates the analog signal paths of Focusrite’s revered ISA 110 and ISA 130 modules, which were a part of the Focusrite Studio Console. Designed and coded by the DSP geniuses at acclaimed software house Brainworx, the bx_console Focusrite VST/AU/AAX plug-in for Mac and PC faithfully captures the sound, feel and styling of the original iconic hardware.
If you purchased any Red, RedNet or ISA solution from January 2020 on, you will have the plug-in available in your Focusrite account as long as you’ve registered your product.
Features
- RedNet X2P Unit
- Power Supply
- Cat 6 Ethernet Cable
- RedNet Control
- RedNet PCIe drivers (included with RedNet Control download)
- Audinate Dante Controller (installed with RedNet Control)
- Height: 2"
- Weight: 8"
- Length: 5.5"
- Weight: 2.87 lb.
- Total inputs: 4
- Analog inputs: 2
- Digital inputs: 2
- Mic preamps: 2
- XLR/TRS combo jacks: 2
- XLR only jacks: 0
- 1/4” only jacks: 0
- DB25: 0
- S/PDIF in: 0
- ADAT/optical in: 0
- RCA in: 0
- AES/EBU: 0
- MADI: 0
- Dante: 2
- Analog outputs: 2
- Digital outputs: 2
- XLR out: 2
- 1/4” out:
- DB25: 0
- S/PDIF out: 0
- ADAT/optical out: 0
- RCA out: 0
- AES / EBU: 0
- MADI: 0
- Dante: 2
- Connections: Dante
- MIDI I/O: Not Specified
- Headphone output(s): Yes
- Word-clock I/O: Not Specified
- Computer platform: MAC, PC
- Phantom power: Yes
- Direct monitoring: Yes
- Onboard DSP: Yes
- Metering: Yes
- Display: Yes
- Latency control: No
- Monitor control: Yes
- Width: 14.96"
- Height: 4.72"
- Depth: 7.68"
- Weight: 2.87 lb.
- Rack-mountable: No
Specs
Inputs
Focusrite RedNet X2P Professional Audio Interface
- Product Code: 1500000147954
RedNet X2P is a compact 2x2 Dante audio interface with two microphone preamps, a stereo headphone amplifier and stereo line out to connect your studio monitors. With the device’s Dante inputs, you’ll deliver uncompressed, low-latency digital audio to your DAW—simply use a Power over Ethernet switch or PoE injector to do so.
The monitoring display allows unlimited insight and control of the mic preamps, headphone level and line out. A local input mixer allows "more me" monitoring control, while a control lockout ensures settings remain unchanged.
The two digitally-controlled mic preamps provide clean gain and each have individual phantom power, phase reverse, high-pass filter and Air controls. RedNet X2P provides high-performance audio conversion with over 118dB dynamic range. These converters have been expertly selected and calibrated to provide the best balance of sound quality, dynamic range and conversion latency.
Now comes with Brainworx bx_console Focusrite plug-in
This awesome plug-in recreates the analog signal paths of Focusrite’s revered ISA 110 and ISA 130 modules, which were a part of the Focusrite Studio Console. Designed and coded by the DSP geniuses at acclaimed software house Brainworx, the bx_console Focusrite VST/AU/AAX plug-in for Mac and PC faithfully captures the sound, feel and styling of the original iconic hardware.
If you purchased any Red, RedNet or ISA solution from January 2020 on, you will have the plug-in available in your Focusrite account as long as you’ve registered your product.Two of Focusrite's preamps provide ultra-clean gain, stereo linking, individual phantom power, a high-pass filter, phase reverse and Air mode High-quality conversion, with over 118dB dynamic range Power over Ethernet allows a single cable to deliver audio, control and power to RedNet X2P. Local input mix allows ‘more-me’ style monitoring for easy foldback control Mic stand mount keeps the unit out of the way and within reach Focusrite offers a 3-year manufacturer's warranty What's in the box
The monitoring display allows unlimited insight and control of the mic preamps, headphone level and line out. A local input mixer allows "more me" monitoring control, while a control lockout ensures settings remain unchanged.
The two digitally-controlled mic preamps provide clean gain and each have individual phantom power, phase reverse, high-pass filter and Air controls. RedNet X2P provides high-performance audio conversion with over 118dB dynamic range. These converters have been expertly selected and calibrated to provide the best balance of sound quality, dynamic range and conversion latency.
Now comes with Brainworx bx_console Focusrite plug-in
This awesome plug-in recreates the analog signal paths of Focusrite’s revered ISA 110 and ISA 130 modules, which were a part of the Focusrite Studio Console. Designed and coded by the DSP geniuses at acclaimed software house Brainworx, the bx_console Focusrite VST/AU/AAX plug-in for Mac and PC faithfully captures the sound, feel and styling of the original iconic hardware.
If you purchased any Red, RedNet or ISA solution from January 2020 on, you will have the plug-in available in your Focusrite account as long as you’ve registered your product.
Features
- RedNet X2P Unit
- Power Supply
- Cat 6 Ethernet Cable
- RedNet Control
- RedNet PCIe drivers (included with RedNet Control download)
- Audinate Dante Controller (installed with RedNet Control)
- Height: 2"
- Weight: 8"
- Length: 5.5"
- Weight: 2.87 lb.
- Total inputs: 4
- Analog inputs: 2
- Digital inputs: 2
- Mic preamps: 2
- XLR/TRS combo jacks: 2
- XLR only jacks: 0
- 1/4” only jacks: 0
- DB25: 0
- S/PDIF in: 0
- ADAT/optical in: 0
- RCA in: 0
- AES/EBU: 0
- MADI: 0
- Dante: 2
- Analog outputs: 2
- Digital outputs: 2
- XLR out: 2
- 1/4” out:
- DB25: 0
- S/PDIF out: 0
- ADAT/optical out: 0
- RCA out: 0
- AES / EBU: 0
- MADI: 0
- Dante: 2
- Connections: Dante
- MIDI I/O: Not Specified
- Headphone output(s): Yes
- Word-clock I/O: Not Specified
- Computer platform: MAC, PC
- Phantom power: Yes
- Direct monitoring: Yes
- Onboard DSP: Yes
- Metering: Yes
- Display: Yes
- Latency control: No
- Monitor control: Yes
- Width: 14.96"
- Height: 4.72"
- Depth: 7.68"
- Weight: 2.87 lb.
- Rack-mountable: No
Specs
Inputs
- Brand: Focusrite
- Viewed: 19
- Availability: In Stock
