The RØDE K2 is a premium valve condenser microphone featuring dual 1” gold-sputtered diaphragms. Infinitely variable control of the polar pattern from omnidirectional through cardioid and bidirectional/figure-8 provides the freedom and flexibility to excel in any recording situation.
High-performance specifications (including a maximum SPL of 162dB) are combined with the character and subtleties of the legendary mics of the 1950s to provide a microphone that not only provides world-class vocals, but is perfectly at home recording a wide range of instruments both up close or in a wider "room" capacity.
The RØDE K2 microphone is designed and made in Australia, and covered by RØDE Microphones' industry-leading 10-year warranty.
High-performance specifications (including a maximum SPL of 162dB) are combined with the character and subtleties of the legendary mics of the 1950s to provide a microphone that not only provides world-class vocals, but is perfectly at home recording a wide range of instruments both up close or in a wider "room" capacity.
The RØDE K2 microphone is designed and made in Australia, and covered by RØDE Microphones' industry-leading 10-year warranty.
Features
- Large 1" capsule with gold-sputtered diaphragm and internal shockmounting
- Ultra low noise
- Wide dynamic range
- Class ‘A’ valve circuitry
- Hand-selected and graded 6922 twin-triode valve
- Dedicated power supply
- High-strength welded and heat-treated steel mesh head
- Continuously variable polar patterns—from omni, through cardioid to figure 8, controlled at the power supply
- 10-year extended warranty when you register
- Acoustic Principle: Pressure Gradient
- Active Electronics: Valve/tube impedance converter with bipolar output buffer
- Capsule: 1"
- Polar Pattern: Cardioid
- Address Type: Side
- Frequency Range: 20Hz–20kHz
- Output Impedance: 200 ohm
- Maximum SPL: 162dBSPL
- Maximum Output Level: 30.0mV (@ 1kHz, 1% THD into 1 kohm load)
- Sensitivity: -36.0dB re 1 volt/Pascal (16 mV @ 94dB SPL) +/- 2dB @ 1kHz
- Equivalent Noise Level (A-weighted): 10dBA
- Power supply included
- Weight: 815 g
- Dimensions (HxWxD): 208 mm x 55 mm x 55 mm
- Output: XLR Output
- Warranty: 1 year with free extension to 10 years following registration
Specs
RODE K2 Large Diaphragm Tube Condenser Microphone
- Product Code: 1274115056226
The RØDE K2 is a premium valve condenser microphone featuring dual 1” gold-sputtered diaphragms. Infinitely variable control of the polar pattern from omnidirectional through cardioid and bidirectional/figure-8 provides the freedom and flexibility to excel in any recording situation.
High-performance specifications (including a maximum SPL of 162dB) are combined with the character and subtleties of the legendary mics of the 1950s to provide a microphone that not only provides world-class vocals, but is perfectly at home recording a wide range of instruments both up close or in a wider "room" capacity.
The RØDE K2 microphone is designed and made in Australia, and covered by RØDE Microphones' industry-leading 10-year warranty.
High-performance specifications (including a maximum SPL of 162dB) are combined with the character and subtleties of the legendary mics of the 1950s to provide a microphone that not only provides world-class vocals, but is perfectly at home recording a wide range of instruments both up close or in a wider "room" capacity.
The RØDE K2 microphone is designed and made in Australia, and covered by RØDE Microphones' industry-leading 10-year warranty.
Features
- Large 1" capsule with gold-sputtered diaphragm and internal shockmounting
- Ultra low noise
- Wide dynamic range
- Class ‘A’ valve circuitry
- Hand-selected and graded 6922 twin-triode valve
- Dedicated power supply
- High-strength welded and heat-treated steel mesh head
- Continuously variable polar patterns—from omni, through cardioid to figure 8, controlled at the power supply
- 10-year extended warranty when you register
- Acoustic Principle: Pressure Gradient
- Active Electronics: Valve/tube impedance converter with bipolar output buffer
- Capsule: 1"
- Polar Pattern: Cardioid
- Address Type: Side
- Frequency Range: 20Hz–20kHz
- Output Impedance: 200 ohm
- Maximum SPL: 162dBSPL
- Maximum Output Level: 30.0mV (@ 1kHz, 1% THD into 1 kohm load)
- Sensitivity: -36.0dB re 1 volt/Pascal (16 mV @ 94dB SPL) +/- 2dB @ 1kHz
- Equivalent Noise Level (A-weighted): 10dBA
- Power supply included
- Weight: 815 g
- Dimensions (HxWxD): 208 mm x 55 mm x 55 mm
- Output: XLR Output
- Warranty: 1 year with free extension to 10 years following registration
Specs
- Brand: RODE
- Viewed: 14
- Availability: In Stock
