The RØDE NTG-5 is a short, shotgun condenser microphone with an ultralightweight aluminum body that makes it ideal for use on long, demanding shoots. Weighing just 76 g and measuring just over 20 cm, the NTG-5 is one of the most compact professional shotgun mics. Combined with a tightly controlled frequency response, smooth off-axis response and very low self-noise (just 10dBA), the NTG-5 sounds spectacular in a wide variety of applications.
Like the legendary RØDE NTG-3, the NTG-5 sound fantastic as a voiceover mic.The NTG-5 has a flatter low end, but a very similar high frequency response to the NTG-3.
The NTG-5 location recording kit includes the NTG-5 mic, PG2-R pistol grip, WS10 windshield, RØDE foam windshield, PG2-R Pro cable, RM5 microphone clip and a small pouch bag.
Like the legendary RØDE NTG-3, the NTG-5 sound fantastic as a voiceover mic.The NTG-5 has a flatter low end, but a very similar high frequency response to the NTG-3.
The NTG-5 location recording kit includes the NTG-5 mic, PG2-R pistol grip, WS10 windshield, RØDE foam windshield, PG2-R Pro cable, RM5 microphone clip and a small pouch bag.
Features
RODE NTG-5 Key Features
- Revolutionary acoustic design, delivering a natural, uncolored sound
- Extremely lightweight (just 76 g), and short in length (just 203 mm)
- Tailored frequency response and very low self-noise of just 10dBA
- Highly directional supercardioid polar pattern and smooth off-axis response
- RF-bias technology and conformal coating ensure superior performance in adverse environmental conditions
- Polar Pattern: Supercardioid shotgun
- Frequency Range: 20 Hz–20 kHz
- Frequency Response: 100 Hz–20 kHz ±3 dB // 50 Hz–20 kHz ±6 dB
- Acoustic Principle: RF-bias condenser
- Active Electronics: RF-bias demodulation
- Output Impedance: 25 ohm
- Signal to Noise Ratio: 84 dB
- Equivalent Noise: 10 dB SPL (A-weighted, as per IEC651)
- Input SPL at 1%THD: 130 dB SPL (1kHz at 1% THD, 600 ohm load)
- Power Requirements: 2 mA at 48V phantom power
- Sensitivity: -23.5 dB re. 1 Volt/Pascal or Better (66 mV @ 94 dB SPL @ 1 kHz)
- NTG5 Dimensions (LxWxH): 203mm x 19mm
- PG2-R Dimensions (LxWxH): 117mm x 60mm x 240mm
- NTG5 Weight: 76g
- PG2-R Weight: 224g
Specs
RODE NTG5 Shotgun Condenser Microphone Kit
- Product Code: 1500000310637
The RØDE NTG-5 is a short, shotgun condenser microphone with an ultralightweight aluminum body that makes it ideal for use on long, demanding shoots. Weighing just 76 g and measuring just over 20 cm, the NTG-5 is one of the most compact professional shotgun mics. Combined with a tightly controlled frequency response, smooth off-axis response and very low self-noise (just 10dBA), the NTG-5 sounds spectacular in a wide variety of applications.
Like the legendary RØDE NTG-3, the NTG-5 sound fantastic as a voiceover mic.The NTG-5 has a flatter low end, but a very similar high frequency response to the NTG-3.
The NTG-5 location recording kit includes the NTG-5 mic, PG2-R pistol grip, WS10 windshield, RØDE foam windshield, PG2-R Pro cable, RM5 microphone clip and a small pouch bag.
Like the legendary RØDE NTG-3, the NTG-5 sound fantastic as a voiceover mic.The NTG-5 has a flatter low end, but a very similar high frequency response to the NTG-3.
The NTG-5 location recording kit includes the NTG-5 mic, PG2-R pistol grip, WS10 windshield, RØDE foam windshield, PG2-R Pro cable, RM5 microphone clip and a small pouch bag.
Features
RODE NTG-5 Key Features
- Revolutionary acoustic design, delivering a natural, uncolored sound
- Extremely lightweight (just 76 g), and short in length (just 203 mm)
- Tailored frequency response and very low self-noise of just 10dBA
- Highly directional supercardioid polar pattern and smooth off-axis response
- RF-bias technology and conformal coating ensure superior performance in adverse environmental conditions
- Polar Pattern: Supercardioid shotgun
- Frequency Range: 20 Hz–20 kHz
- Frequency Response: 100 Hz–20 kHz ±3 dB // 50 Hz–20 kHz ±6 dB
- Acoustic Principle: RF-bias condenser
- Active Electronics: RF-bias demodulation
- Output Impedance: 25 ohm
- Signal to Noise Ratio: 84 dB
- Equivalent Noise: 10 dB SPL (A-weighted, as per IEC651)
- Input SPL at 1%THD: 130 dB SPL (1kHz at 1% THD, 600 ohm load)
- Power Requirements: 2 mA at 48V phantom power
- Sensitivity: -23.5 dB re. 1 Volt/Pascal or Better (66 mV @ 94 dB SPL @ 1 kHz)
- NTG5 Dimensions (LxWxH): 203mm x 19mm
- PG2-R Dimensions (LxWxH): 117mm x 60mm x 240mm
- NTG5 Weight: 76g
- PG2-R Weight: 224g
Specs
- Brand: RODE
- Viewed: 11
- Availability: In Stock
